If you own a JLab Go Air earbud and have lost the charger or forgotten it at home, don’t worry! You can still charge your earbud without a charger. This article will guide you through several ways to charge JLab Go Air without a charger. So, whether you’re traveling, at work, or forgot your charger at home, this post will provide the necessary steps to keep your JLab Go Air earbuds charged and ready to use.
Are you tired of constantly losing or misplacing your JLab Go Air charger? Or you’re in a pinch and need to charge your earbuds but don’t have access to a charger. Whatever the case, there is a solution to charging your JLab Go Air earbuds without a charger.
Table of Contents
Can You Charge JLab Go Air Without Charger?
Yes, charging JLab Go Air earbuds is possible without their original charger. You can use the laptop, power bank, and car charging port to charge your earbuds.
How To Charge JLab Go Air Without Charger Using Laptop:
Charging JLab Go Air earbuds using a laptop is a simple process requiring only a few steps.
First, locate the USB port on your laptop. This is typically found on the side or back of your laptop.
Next, connect one end of a USB cable to the USB port on your laptop. Make sure the USB cable is compatible with your JLab Go Air earbuds.
Once the USB cable is connected to your laptop and the charging case, the earbuds should begin charging automatically. A small LED light on the charging case should indicate that the earbuds are charging.
It is important to note that charging JLab Go Air earbuds using a laptop may take longer than using the original charger. This is because the power output of a laptop’s USB port is typically lower than that of the original charger.
Charging JLab Go Air earbuds using a laptop is a straightforward process requiring a USB cable and a compatible USB port.
How To Charge JLab Go Air Without Charger Using Power Bank:
Charging JLab Go Air earbuds using a power bank is a simple process that requires only a few steps.
First, ensure your power bank is fully charged and has enough power to charge your JLab Go Air earbuds. Check the power bank’s capacity and ensure it is compatible with your earbuds.
Next, locate the USB port on your power bank. This is typically found on the side or back of your power bank.
Connect one end of a USB cable to the USB port on your power bank. Make sure the USB cable is compatible with your JLab Go Air earbuds.
Once the USB cable is connected to your power bank and the charging case, the earbuds should begin charging automatically. A small LED light on the charging case should indicate that the earbuds are charging.
It is important to note that charging JLab Go Air earbuds using a power bank may take longer than using the original charger. This is because the power output of a power bank may be lower than that of the original charger.
How To Charge JLab Go Air Without Charger Using Vehicle:
Charging your JLab Go Air earbuds in your car is convenient for those who are always on the go. Charging JLab Go Air earbuds using a vehicle requires a few simple steps.
First, you must ensure that your car has a functioning USB port. Most modern vehicles have a USB port near the dashboard or the center console. You can use a USB charger if your car doesn’t have a USB port.
Next, you will need a USB cable compatible with your JLab Go Air earbuds. This cable will connect your earbuds to the USB port in your car. Use a high-quality USB cable to ensure that your earbuds charge properly.
After you have connected your USB cable to the USB port in your car, locate the charging case for your JLab Go Air earbuds. Connect the other end of the USB cable to the charging point. The charging case should have a USB port on the bottom or side.
Once you have connected the charging case to the USB cable, the earbuds should begin charging automatically. A small LED light on the charging case should indicate that the earbuds are charging.
It’s important to note that charging your JLab Go Air earbuds in your car may take longer than using the original charger. This is because the power output of a car’s USB port may be lower than that of the original charger.
Also Read: Do Apple Headphones Work On PS5?
How To Guide For JLab Go Air True Wireless Earbuds:
The Go Air True Wireless Earbuds are a great way to enjoy your favorite music or podcasts without the hassle of wires. Here’s how to get the most out of your earbuds:
Charge your earbuds: Before using them, make sure they’re fully charged. To do this, use the USB cable to place the earbuds in the charging case and connect the case to a power source. The LED indicators on the earbuds will light up to indicate that they’re charging. Once the earbuds are fully charged, the LED indicators will turn off.
Pair your earbuds: To pair your earbuds with your device, first make sure that Bluetooth is enabled on your device. Then, take the earbuds out of the charging case, and they will automatically enter pairing mode. Look for “Go Air” in the list of available Bluetooth devices on your device and select it to pair.
Use the earbuds: Once paired, you can start using them. To play or pause music, tap the touchpad on the earbud once. Double-tap the touchpad on the right earbud to skip to the next track. Double-tap the touchpad on the left earbud to return to the previous track. To adjust the volume, tap and hold the touchpad on the right earbud to increase the volume or on the left earbud to decrease the volume.
Take calls: You can also use earbuds to take phone calls. Tap the touchpad on either earbud to answer the call when you receive a call. To end the call, tap the touchpad again. You can also use the earbuds to access your device’s voice assistant by tapping the touchpad three times.
Charge your earbuds again: When you’re done using them, place them back in the charging case to charge them again. The charging case will automatically charge the earbuds, and the LED indicators will show that they’re charging.
That’s it! These simple steps allow you to enjoy your Go Air True Wireless Earbuds and maximize your listening experience.
Conclusion:
In conclusion, learning how to charge JLab Go Air without a charger can be a lifesaver when you don’t have access to a power source or have misplaced your charger. The three methods discussed, using a USB port, power bank, or a charging case from a different model, provide convenient and practical alternatives to charging your earbuds.
However, it is essential to note that these methods may not be as efficient or reliable as using the manufacturer’s charger, and it’s necessary to follow the recommended charging guidelines to avoid damaging your device. With these methods in mind, you can now charge your JLab Go Air earbuds whenever and wherever you need to, ensuring uninterrupted listening experiences.
Can I charge my JLab Go Air earbuds with any USB port?
Yes, you can charge your earbuds with any USB port, including the one on your laptop, computer, or car charger. However, make sure to use a cable compatible with your device and check the power output of the USB port to ensure it’s suitable for charging.
How long does it take to charge JLab Go Air earbuds using a power bank?
The charging time may vary depending on the power bank’s power output and your earbuds’ battery level. Typically, it takes about 2-3 hours to fully charge the JLab Go Air earbuds using a power bank.
Is charging my JLab Go Air earbuds safe without the manufacturer’s charger?
Yes, charging your earbuds using the three methods we’ve discussed is safe if you follow the recommended charging guidelines and use compatible cables and devices. However, remember that using non-manufacturer chargers may not be as efficient or reliable as using the original charger.
