If you’re the proud owner of an Indy Evo earbuds set, you might wonder how to pair them together. These true wireless earbuds offer impressive features, including touch controls, long battery life, and superior sound quality. However, pairing them together for the first time can be confusing. Fortunately, the process is relatively straightforward once you know how to do it.
In this guide, we’ll take you step-by-step through pairing your Indy Evo earbuds together, so you can enjoy your music and easily take calls.
Table of Contents
Understanding the Indy Evo Earbuds:
Before we dive into the pairing process, it’s essential to understand how the Indy Evo earbuds work. The earbuds come with a charging case that can charge the earbuds multiple times before needing to recharge. Each earbud has touch controls that allow you to control your music and answer calls.
The Indy Evo earbuds also have a built-in microphone that lets you make phone calls without removing your earbuds. These earbuds have a noise-isolating design that blocks out external noise, allowing you to focus on your music.
How To Pair Indy Evo Earbuds Together:
Pairing the Indy Evo earbuds together is a straightforward process that should take less than five minutes to complete. Follow these steps to pair your earbuds together:
Step 1: Charge your earbuds and the charging case
Before pairing your earbuds together, you must ensure they are fully charged. Place the earbuds into the charging case and close the lid to do this. The charging case should indicate that it’s charging by flashing a red LED light.
Step 2: Turn on Bluetooth on your Earbuds
Next, you need to turn on Bluetooth on your device. If you’re using an iPhone or iPad, swipe down from the top right corner of the screen to open the Control Center. Then, please tap on the Bluetooth icon to turn it on.
If using an Android device, go to the Settings app and select Connections. Then, tap on Bluetooth to turn it on.
Step 3: Remove the earbuds from the charging case
After the earbuds are fully charged, remove them from the charging case. You should see a flashing blue LED light on each earbud, indicating they are in pairing mode.
Step 4: Put both earbuds into pairing mode
It would be best if you put the earbuds into pairing mode to pair them earbuds together. To do this, press and hold the touch control on each earbud for five seconds until you hear a voice prompt saying “pairing.”
Step 5: Connect to the earbuds from your device
Once the earbuds are in pairing mode, go to the Bluetooth settings on your device and select “Indy Evo” from the list of available devices. Your device should then connect to the earbuds and hear a voice prompt saying.
Common Issues with Indy Evo Earbuds:
Issue 1: Earbuds won’t enter pairing mode
One of the most common issues with Indy Evo earbuds is that they may not enter pairing mode, which is necessary for connecting them to a device. If you have this problem, try resetting the earbuds and returning them to pairing mode.
Issue 2: Earbuds won’t connect to the device
Another common issue with Indy Evo earbuds is that they may need to be connected to your device, even in pairing mode. This issue could be due to outdated firmware or an issue with your device’s Bluetooth settings.
Issue 3: Only one earbud connects to the device
Sometimes, only one earbud may connect to your device, which can cause an uneven listening experience. This issue could be due to a connectivity problem or an earbud issue.
Tip 1: Reset the earbuds
Resetting the earbuds is often the first troubleshooting step you should take. To reset the earbuds, place them back into the charging case, and ensure they are charging. Then, press and hold the touch control on each earbud for ten seconds until the LED light flashes white. This process will reset the earbuds, and you can try pairing them again.
Tip 2: Update the firmware
It could be outdated firmware if you need help connecting your earbuds to your device. To update the firmware, download the Skullcandy app on your device, and follow the instructions to update the firmware.
Tip 3: Check the Bluetooth settings on your device
Ensure that your device’s Bluetooth settings are turned on and that your device is within range of the earbuds. Also, ensure that no other devices are connected to the earbuds, which could cause connectivity issues.
Tip 4: Try pairing with a different device
If you still need help pairing your earbuds with your device, try pairing them with a different device. This process will help you determine if the issue is with the earbuds or your device.
Tip 5: Clean the earbuds
If you’re experiencing issues with only one earbud connecting or low sound quality, it could be due to earwax buildup. Clean the earbuds using a soft-bristled brush or a cotton swab to remove debris gently.
How To Reset Indy Evo Earbuds:
Indy Evo earbuds are popular with many music lovers thanks to their compact design and impressive sound quality. However, like any electronic device, they may sometimes require a reset to restore functionality. Resetting your Indy Evo earbuds is simple in just a few easy steps.
Step 1: Remove the Earbuds from the Case
To begin the resetting process, remove the Indy Evo earbuds from their charging case. Ensure the earbuds are turned off and not connected to any devices.
Step 2: Reset the Earbuds
Once you have removed the earbuds from the case, place them back in the charging case. Keep the lid of the charging case open and press and hold the button on the back for 10 seconds. This will initiate the reset process.
Step 3: Re-Pair the Earbuds
After the reset process is complete, you will need to re-pair the earbuds with your device. To do this, turn on Bluetooth on your device and select “Indy Evo” from the list of available devices. Once the earbuds are connected to your device, you can enjoy your music again.
It’s worth noting that resetting your Indy Evo earbuds will erase any saved settings or preferences, so you may need to adjust the settings to your liking once you’ve repaired the earbuds with your device. If resetting the earbuds doesn’t solve the issue, you may need to contact customer support for further assistance.
How To Use Indy Evo Earbuds:
If you’ve recently purchased a pair of Indy Evo earbuds, you may wonder how to use them. These earbuds are designed to provide high-quality sound and a comfortable fit, making them perfect for music lovers on the go. In this guide, we’ll walk you through the steps to get started with your new Indy Evo earbuds.
Step 1: Charge the Earbuds
Before using your Indy Evo earbuds, you’ll need to charge them fully. Place the earbuds in the charging case and ensure it is connected to a power source. The earbuds will automatically begin charging once they’re in the case.
Step 2: Turn on the Earbuds
Remove your Indy Evo earbuds from the charging case to turn them on. In pairing mode, the earbuds will automatically turn on. You’ll know the earbuds are in pairing mode when you hear a voice prompt saying “Power on” followed by “Ready to pair.”
Step 3: Connect to Your Device
To connect your Indy Evo earbuds to your device, open your Bluetooth settings and select “Indy Evo” from the list of available devices. Your music will start playing once you are connected.
Step 4: Control the Earbuds
The Indy Evo earbuds come with touch controls allowing you to control your music and call management. To play or pause your music, tap the touch sensor once. Double-tap the touch sensor on the right earbud to skip to the next track. Double-tap the touch sensor on the left earbud to return to the previous track. To answer or end a call, tap the touch sensor once. Press and hold the touch sensor for two seconds to reject a call.
Step 5: Adjust the Fit
To ensure a comfortable and secure fit, the Indy Evo earbuds come with ear gels in three different sizes. Choose the size that best fits your ears and insert the earbuds. Twist the earbuds slightly until they fit snugly and securely.
Pairing your Indy Evo earbuds together is a simple process that can be completed in just a few steps. Following the manufacturer’s instructions, you can ensure that your earbuds are properly paired and working together to provide high-quality stereo sound.
Whether you’re listening to music, watching a movie, or making a phone call, pairing your Indy Evo earbuds together is essential to getting the most out of your earbuds. So if you’re having trouble pairing your earbuds, don’t hesitate to follow the steps outlined above, and you’ll be on your way to enjoying crystal-clear audio in no time.